customized gift for pets
Company News
  • pillow covers vintage Paper Hair Bows- A tutorial c
  • pillow covers vintage Paper Flower Mason Jar Craft
  • pillow covers vintage Paper Hair Bows- A tutorial c
Contact Us



pillow covers vintage Embroider-Along Part 6- How to Embroider Wovens decorative pillow shams

Updated: 2020-03-08 18:26 Views: 78

Welcome back to my?Embroider-Along: Part 6. Hi, my name is?Sue O’Very, BERNINA Ambassador and machine embroidery expert. This series began with a great discussion on the four basics for machine embroidery. Jumping right into stabilizers and materials I discussed embroidering on knits. Today I’;m excited to share with you how to embroider on various woven materials and show you how to embroider the perfect last minute hostess gift.?

During this Embroider-Along?I have been referring to wovens as materials with little to no stretch. Woven materials are considered to be more structured. Consider a kitchen towel, pillow case, and denim. Even though each of these materials is a woven, I will show you how it’s important to use the correct type of stabilizer to get the best results.

accent pillow case baby burlap decorative

There are two types of stabilizers used for wovens; Cut Away and Tear Away. Each of these types of stabilizer have different weight and backing options. For example: light, medium and heavypillow covers vintage, fusible or sticky backings. Some even come in black, white or a light tan.

Within the category of? “Cut Away” there are lots of different varieties, however the basic two are:?Poly Mesh?(thin/light) or?Medium-Heavy Weight?(thick/heavy). Refer to?Part 2?of the Embroider-Along for more details on stabilizers. Below are a list of the various types, notice there is fusible and sticky as well.

When embroidering on wovens it is desirable to remove as much of the stabilizer as possible, Tear Away is the ideal solution. Just like the Cut Away, there are multiple options on the market today.

The choice of thread for embroidering on wovens really depends on the design and desired effect. Refer to?Part 3 where I talked about different types of threads and needles. As far as needles, use an embroidery size?75/11?for wovens like kitchen towels and pillow cases. Use an embroidery needle 90/14 for heavier wovens like denim and broadcloth.

Part 4?on my Embroider-Along was all about hooping! There are two ways of hooping; hoop the material and stabilizer together or?hoop the stabilizer and float the material on top. When it comes to embroidering on woven materials, in addition to floating the material on top, you may also find the need to float an extra piece of stabilizer underneath the hoop. This is a great trick when working with small, hard to hoop woven materials. In the step-by-step tutorial below you will see this first hand.

Pro tip:?Because the sticky stabilizer is very thin, I consider it more of an adhesive?(Part 4) vs a stabilizer. There isn’;t enough stabilization most times for the embroidery design itself. That’;s why floating a piece of Tear Away underneath the hoop is recommended.

The best types of designs will depend on the thickness of the woven. Consider a pillow case vs denim. With a pillow case I would recommend a light, open airy design or lettering. Denim is thicker and often times stiff by nature allowing a heavier filled design.

Below is a basic guide for woven materials and the suggested stabilizers:

The wine bottle apron is a great last minute hostess gift. Add lettering from your embroidery machine to personalize for the recipient. Let’;s go over step-by-step how to use a Sticky stabilizer while floating a Tear Away underneath it. This is a great lesson for any tiny woven project.

Based on my stabilizer guide above I would hoop a Sticky stabilizer and float a?Tear Away underneath it. Depending on how light or dense the design is you might find it necessary to add two layers of the Tear Away.

Press wrinkles using Best Press. Using a marking pen, find the center area of where you’;d like the design. I used the Frixion highlighters?because removing is achieved with an iron and they leave no residue.

It’;s always recommended to choose the smallest hoop for any machine embroidery project. Doing so saves stabilizer and ensure the hoop to tightest around the stitching. However when the item is so small it still doesn’;t fit within the hoop, move up to the next size. Let’;s take a look at the smallest two hoops for my BERNINA 790 PLUS.

Small hoop: Notice how the wine bottle apron will not fit into the hoop.

Medium hoop: The apron definitely will not fit in with traditional “;hooping”;. This is where the Sticky stabilizer really comes into play. Since we are going to hoop the Sticky , it would be more logical to use the medium size hoop allowing more of the adhesive to hold the apron in place. Stabilizing and hooping method for this type of project will be to hoop the?StabilStick?and float the?Ultra Clean and Tear Medium weight?underneath the hoop.

This is the fun part! Begin by hooping the?StabilStick.?You will notice that is has two layers. The sticky side and paper side. Hoop a large piece covering at least 1″; outside the hoop with the paper side up.

Use a pin to score the paper side of the sticky without going through to the sticky side. Notice I marked an “;X”;. Use the pin to pull away the paper revealing the Sticky?stabilizer below.

Use the hoops grid and marking pen. Mark directly onto the Sticky stabilizer. Connect marks to make a cross hair line. Keep the center mark on the Sticky stabilizer over the center mark on the cutting mat, this will help align the wine bottle apron.

Pro Tip: Use a rotary mat, Quilters Cut ‘;n Press shown, to lay the hoop/stabilizer over. Use the lines from the rotary mat to help you connect your dots to form the cross hair line.

Place a pin through the center of the mark on the wine bottle apron. Align mark on sticky stabilizer and press apron firmly to sticky stabilizer.

Choose design or font. I used a really pretty font on my BERNINA 790 PLUS. Select the size and message as desired. I chose font 5 and used the letter “;P”;.

Change the hoop size on the screen. Since we are visual creatures it is also nice to add the motif center and turn the grid lines on.

Adjust the size and edit as needed. Check the placement on the wine bottle apron using the check option.

Before you stitch, slide a piece of tear away (or two layers depending how dense the design is) under the hoop. This is called Floating. Embroider the design.

Once stitching is complete, remove hoop from machine and gently remove the tear away on the wrong side of the hoop holding the stitches with one hand and removing the stabilizer with the other. Using a pair of short sharp scissors carefully perforate the wine bottle apron from the sticky stabilizer. The goal is to leave as small of a hole on the stabilizer without tearing the stabilizer.

The best part of Sticky stabilizer is it can be patched. In fact, you can patch between 2-4 times before the original sticky wears off. Simply cut a piece 1″; larger than the hole. Remove paper. Place the adhesive side onto the wrong side of the hoop allowing the sticking side to peek through the front of the hoop. Now your hoop is ready for use again. Follow the same steps as before to continue embroidery.

This wine bottle apron is a hostess gift for friends who were married in 2001. I simply used built in lettering on my?BERNINA 790 PLUS?and added, “;est 2001”;. Use thread snips to get into those tiny threads the machine didn’;t clip. Using your steam iron press the marking pen away.

Buy your favorite bottle of wine or sparkling cider, add the little hat on top and tie the wine bottle apron around the bottle. You could even add some bling with crystals or add some decorative stitching. Your hostess will talk about your gift for years to come!

The next two parts of my Embroider-Along continue with the “How to” for napped and sheer materials. Each part I’ll show you the proper stabilizers for that a verity of materials in that category and how to embroider on one of them.

What is your go to handmade hostess go to gift? Let me know in the comments below and please ask any questions you might have about napped materials for next weeks post. Be sure to keep following along here, you can also follow BERNINA on?Instagram?and?Facebook?to see the latest post!

Here is the?Embroider-along schedule:

Until next time I hope you have a creative day, bye-bye!


Late last fall, we did a DIY kitchen remodel. ?I painted the kitchen cabinets, we built a range hood, and added molding to the upper cabinets. ?I really wanted to replace our builder grade, 1980’s formica countertops with concrete – until I talked to a neighbor who had actually done this. ?He explained how they built molds, rented a concrete mixer . ?. ?. and the whole messy process! ?It just seemed like too much of a project to do on our own.? But, I didn’t give up and kept searching the internet and Pinterest for perhaps an easier DIY concrete countertop.

Make a lovely little tartan cape with boot gaiters and a fur tam and muff to keep any little 18" doll warm and cozy on an outing with their favorite friend.

Unlike some other areas of the home, the bedroom is one of the most straight forward and easy rooms to design. Whether it be your master suite, spare room or child’s room, a few simple steps will give the space a sense of style, cohesiveness and sense. The most effective way to do this is to update your soft furnishings.

Previous: pillow covers vintage Embroider-Along Part 5- How to Embroider Knits decorative pillow shams
Next: pillow covers vintage Embroider-Along Part 7- Napped Fabrics decorative pillow shams